Section 4

3.To disengage the deck drive, push the switch in to the disengage position.

4.Always operate the engine at full throttle to properly maintain cutting speed. If the engine starts to lug down, reduce the forward speed and allow the engine to operate at maximum RPM.

4.7 HILLSIDE OPERATION

WARNING:

DO NOT operate on steep slopes. To check a slope, attempt to back up it (with the cutter deck down). If the machine can back up the slope without the wheels slipping, reduce speed and use extreme caution. ALWAYS FOLLOW OSHA APPROVED OPERATION.

1.This mower has been designed for good traction and stability under normal mowing conditions. However, caution must be used when traveling on slopes, especially when the grass is wet. Wet grass reduces traction and steering control. The Roll Over Protection System is standard equipment for this machine. See Section 2.5, page 7 of this manual for further details.

2.To prevent tipping or loss of control, do not start or stop suddenly, avoid unnecessary turns and travel at reduced speed. If tires loose traction, disengage blades and proceed slowly off the slope.

3.Avoid sudden starts when mowing uphill. Sudden starts may cause the machine to tip backwards.

4.Loss of traction may occur when traveling down hill. Weight transfers to the front of the machine and may cause the drive wheels to slip causing loss of braking or steering.

5.Keep tires properly inflated.

park the machine on an incline.

2.Place the steering control levers in the neutral position.

3.Disengage the cutter blades.

4.Slow the engine to idle speed.

5.Engage the parking brake.

6.Turn the ignition key to the OFF position and remove the key.

4.9 AFTER OPERATION

1.Wash the entire mower after each use. Do not use high pressure spray or direct the spray onto electrical components.

-IMPORTANT-

Do not wash a hot or running engine. Cold water will damage the engine. Use compressed air to clean the engine if it is hot.

2.Keep the entire mower clean to inhibit serious heat damage to the engine or hydraulic oil circuit.

3.Check the drive belts for proper alignment and any signs of wear. Correct and adjust if necessary.

To avoid injury from burns, allow the mower to cool before removing the fuel tank cap and refueling.

4.After the mower has cooled down, fill the fuel tanks with fresh, clean fuel at the end of every day of operation. See Engine Owner's Manual for proper octane requirements.

5.Check the tire pressure. Adjust pressure if necessary.

4.8 PARKING THE MOWER

1. Park the machine on a flat, level surface only. Do not

16

Page 19 Page 21
Page 20
Image 20
Scag Power Equipment STWC operating instructions Hillside Operation, Parking the Mower
Page 19 Page 21

STWC specifications

The Scag Power Equipment STWC, or the Scag Turf Tiger Walk Behind Mower, is a powerful and durable machine designed for the professional landscaper and serious lawn care enthusiast. Known for its robust construction and high-performance capabilities, the STWC provides exceptional cutting efficiency and versatility in various mowing conditions.

One of the standout features of the STWC is its industrial-grade engine options. With choices ranging from EFI to air-cooled variants, users benefit from superior power and fuel efficiency. The mower's engine options ensure that operators can tackle tough mowing tasks with confidence. The STWC is equipped with a high-capacity fuel tank, allowing for extended run times, making it ideal for larger properties or commercial applications.

The STWC features Scag's proprietary Hydro-Gear transmission system, which provides smooth operation and excellent maneuverability. This system allows for precise speed control and helps reduce operator fatigue. Additionally, the mower's heavy-duty steel frame and mower deck contribute to its durability, ensuring it can withstand the rigors of professional use. The cutting deck is available in various sizes, accommodating individual preferences and mowing requirements.

Ergonomic design is a hallmark of the STWC, ensuring comfort during extended hours of operation. The handlebars are adjustable to suit different operator heights, and the soft-touch grips minimize vibration, enhancing user comfort. The mower also features commercial-grade components, including high-performance blades and a high-efficiency air filtration system, which contribute to a cleaner cutting performance.

Another noteworthy characteristic is the mower's versatility. The STWC can be equipped with various accessories and attachments, such as grass catchers, mulch kits, and even spreaders, allowing users to customize their mower for a range of tasks. This adaptability makes it an excellent choice for both residential and commercial landscaping needs.

In terms of maintenance, the STWC is designed for ease, with quick-access components and simple service points. Regular maintenance can be performed conveniently, ensuring the machine remains in peak operating condition.

Overall, the Scag Power Equipment STWC stands out as a high-performance walk-behind mower that combines power, durability, and versatility. Its innovative technologies and thoughtful design make it a preferred choice among professionals who demand reliability and excellent cutting results. Whether for home use or commercial landscaping, the STWC promises a superior mowing experience.
Top Page Image Contents