Section 7

7.8 DRIVE BELTS

All drive belts are spring loaded and self-tensioning, however after the first 2, 4, 8 and 10 hours of operation, the belts should be checked for proper alignment and wear. Thereafter, check the belts after every 40 hours of operation or weekly, whichever occurs first.

-NOTE-

If you experience frequent belt wear or breakage, see your authorized Scag Dealer for belt adjustment.

7.9CUTTER BLADES

A. Blade Inspection

1.Remove the ignition key before servicing the blades.

2.Raise the mower deck to the highest position. Place the lanyard pin in the highest cutting height positon to prevent the cutter deck from falling.

WARNING:

Always wear proper hand and eye protection when working with cutter blades.

3.Check the cutter blades for straightness. If the cutter blades appear bent, they will need to be replaced.

B. Blade Sharpening

-NOTE-

If possible, use a file to sharpen the blade. Using a wheel grinder may burn the blade.

-NOTE-

DO NOT sharpen the blades beyond 1/3 of the width of the blade.

1.Sharpen the cutting edge at the same bevel as the original (See Figure 7-9). Sharpen only the top of the cutting edge to maintain sharpness.

Angle Blade Back

Do Not Cut In

 

X Must NOT Exceed

30

1/3 Blade Width

SGB033

 

Figure 7-9 Blade Sharpening

2.Check the balance of the blade. If the blades are out of balance, vibration and premature wear can occur. See your authorized Scag dealer for blade balancing or special tools, if you choose to balance your own blades.

C. Blade Replacement

WARNING:

Do not attempt to straighten a bent blade, and never weld a broken or cracked blade. Always replace it with a new blade to assure safety.

4.If a blade cutting edge is dull or nicked, it should be sharpened. Remove the blades for sharpening. See "Blade Replacement."

-NOTE-

Keep the blades sharp. Cutting with dull blades not only yields a poor mowing job, but slows the cutting speed of the mower and causes extra wear on the engine and the blade drive.

WARNING:

Always wear proper hand and eye protection when working with cutter blades.

1.Remove the ignition key before replacing the blades.

2.Raise the mower deck to the highest position. Place the lanyard pin in the highest cutting height positon to prevent the cutter deck from falling.

35

Page 38 Page 40
Page 39
Image 39
Scag Power Equipment SZC manual Drive Belts, Cutter Blades, Blade Inspection, Blade Sharpening, Blade Replacement
Page 38 Page 40

SZC specifications

Scag Power Equipment is renowned for delivering quality lawn care equipment, and the Scag SZC series exemplifies this commitment to excellence. Designed specifically for landscape professionals and serious homeowners, the SZC combines power, precision, and user-friendly features to make mowing more efficient and enjoyable.

At the heart of the Scag SZC is its powerful engine options. The mower comes equipped with reliable engines from leading manufacturers, including Kohler and Vanguard. These engines provide robust performance, ensuring that users can tackle even the most challenging mowing tasks with ease. The enhanced torque and power translate into faster mowing speeds without compromising cutting quality, allowing operators to cover more ground in less time.

One of the standout features of the Scag SZC is its innovative cutting deck design. The mower boasts a patented Velocity Plus deck, which enhances airflow and grass flow for superior cutting and bagging performance. This design not only leaves a clean, manicured finish but also minimizes clumping in wet conditions, ensuring optimal results every time. Available in multiple cutting widths, the SZC accommodates various lawn sizes and shapes, offering flexibility for different mowing situations.

The SZC is equipped with advanced technology that enhances user experience and operational efficiency. The intuitive controls and ergonomic seating ensure comfort during prolonged use, reducing operator fatigue. Its hydrostatic transmission allows for smooth operation, enabling users to navigate complex terrains effortlessly. The enhanced maneuverability ensures that users can easily tackle tight spots and intricate landscaping features, making it ideal for both commercial and residential applications.

Durability is another hallmark of the Scag SZC. Built with high-quality materials and a rugged frame, the mower is designed to withstand the rigors of regular use. The heavy-duty construction not only extends the life of the mower but also enhances stability during operation, making it safe and reliable.

Furthermore, the Scag SZC is engineered with maintenance efficiency in mind. Accessible components facilitate easy servicing, reducing downtime and ensuring that the mower remains in peak operational condition. Maintenance reminders built into the system help users keep track of service intervals, promoting a proactive approach to care.

In conclusion, the Scag Power Equipment SZC series offers a combination of power, precision, and practicality. With its robust engine options, innovative cutting technology, comfortable controls, and durable construction, it is a top choice for anyone looking to elevate their lawn care experience. Whether you're a professional landscaper or a dedicated homeowner, the Scag SZC can meet and exceed your mowing expectations.
Top Page Image Contents