Sceptre Technologies E195 Switching a, Channel or, Source Changes, Volume, There is Noise or

Problems	Solutions
SWITCHING A	Different channels and inputs will sometimes have this effect
CHANNEL OR	because the channel signal’s own volume is already loud.
SOURCE CHANGES	There is no way remove this completely. The TV has an
THE VOLUME	AUTO VOLUME LEVEL function that can combat this type of
	effect. Please make sure that function is turned on.
THERE IS NOISE OR	When your TV’s resolution is higher than the digital channel’s
TRASH PIXELS ON	broadcast resolution, the signal is up-converted to match your
THE SCREEN	TV’s resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH	The E195 HDTV is an ideal platform for viewing High
DEFINITION USERS	Definition Content. The best image quality can be achieved by
	HDMI, YPbPr (Component), then VGA. However, due to
	variances in broadcast practices, it is possible some image
	distortions can occur.
TIPS FOR	Letterboxed (Widescreen) versions of DVD movies are most
LETTERBOX	commonly formatted for standard 4:3 TVs. The E195 HDTV
CONTENT USERS	has the capability of expanding this content so the entire
	screen is filled at the expense of the image proportion. To use
	this function press the aspect button on the remote control and
	cycle among the available options.
I CANNOT FIND THE	The buttons are represented by the ▲▼◄► buttons located
VOLUME AND	on the remote control. ▲▼ changes the channels and ◄►
CHANNEL	changes the volume.
CHANGING
BUTTONS
I CANNOT FIND	The enter button has the symbol ↵. It is located in the center
ENTER BUTTON	of the ▲▼◄► buttons.
TV TURNS OFF	The TV features a power saving mode which will automatically
AUTOMATICALLY	turn off the TV, if there’s no signal provided for more than 5
AFTER 5 MINUTES	minutes.

- 48 -

www.SCEPTRE.com

SCEPTRE E195 HDTV User Manual