Item Number Component | Description | |
| EXIT button | 1. Pressing the EXIT button without opening the On Screen Display (OSD) |
|
| initiates an auto adjustment which reconfigures all settings for the monitor to |
|
| the optimum display values of the OSD. |
2.While the OSD user interface is in use, press the EXIT button to exit the current menu and return to the previous menu or, press the EXIT button to leave an adjustment menu when the adjustment is complete.
3.From the Main Menu screen, pressing the EXIT button, will exit the OSD.
Left/Down Arrows button Pressing this button moves left or down through the menu and decreases the value when making an adjustment.
| Right/Up Arrows button | Pressing this button moves right or up through the menu and increases the |
|
| value when making an adjustment. |
| MENU button | 1. If the OSD user interface has not been opened, pressing the MENU button |
|
| initiates it and brings up the Main menu. |
|
| 2. While the OSD user interface is in use, when a setting choice is reached, |
|
| pressing the MENU button brings up the setting’s adjustment screen. |
| LCD POWER button | Turns on power to the LCD monitor. An LED light next to the switch will |
|
| illuminate when the monitor is in |
| UPGRADE port | An |
|
| administrator’s server to the Rack LCD Console. |
| FW UPGRADE | The Firmware Upgrade switch should be in the NORMAL position during |
| NORMAL / RECOVERY normal operation of the Rack LCD Console. The switch is set to RECOVERY | |
|
| only when a Firmware Upgrade Recovery is performed. (See “Firmware |
|
| upgrade recovery” on page 13 for more information.) |
| LCD monitor | The LCD display monitor of the Rack LCD Console. |
| RESET switch | Press this recessed switch in with a small object (a pen point) to perform a |
|
| system reset. |
| SCROLL LOCK LED | When illuminated, the SCROLL LOCK LED indicates the scroll lock function |
|
| on the keyboard is enabled. |
| CAPS LOCK LED | When illuminated, the CAPS LOCK LED indicates the capitals lock function |
|
| on the keyboard is enabled. |
| NUM LOCK LED | When illuminated, the NUM LOCK LED indicates the number lock function |
|
| on the keyboard is enabled. |
| USB port | Located on the front of the Rack LCD Console, the USB port is used to connect |
|
| a peripheral device (flash drive, |
the Rack LCD Console to the connected target device (a KVM switch or server).
Rack LCD Console User Manual | 5 |
