Operation
Basic Functions
Opening the Rack LCD Console
To access the console, slide the Rack LCD Console out of the rack and raise the cover.
Slide Rail Caution: Do not lean your body weight on the Rack LCD Console. Do not place heavy objects on the Rack LCD Console. Do not use the Rack LCD Console as a shelf.
Closing the Rack LCD Console
Close the cover and slide the Rack LCD Console into the rack.
Powering off and restarting
Turn off the power to the Rack LCD using the rear panel power switch. See “Power Switch” on page 6 for the location of the On/Off switch.
To restart the Rack LCD turn the rear panel power switch back on.
Standby mode
The Rack LCD will go into Standby mode to save energy when the cover is closed. The display will turn OFF when the cover reaches approximately 15 degrees from completely closed. Power will remain ON but the monitor display will be OFF.
Hot plugging
Components can be removed and added to the Rack LCD Console by unplugging their cables from the ports without the need to shut down the console.
LCD OSD (On Screen Display) configuration
Button |
| Function |
|
|
|
MENU | 1. | Starting: Pressing the MENU button initiates the LCD OSD and brings up the Main menu. |
| 2. While the OSD user interface is in use, when a setting choice is reached, pressing the MENU button | |
| brings up the setting adjustment window. | |
Right/Up Arrow | Clicking the Right/Up Arrow button moves the cursor Right or Up through the menus, or increases the | |
Button | value when making an adjustment. | |
Left/Down | Clicking the Left/Down Arrow button moves the cursor Left or Down through the menus, or decreases | |
Arrow Button | the value when making an adjustment. | |
EXIT | 1. | If the LCD OSD user interface has not been started, pressing the EXIT button initiates an auto |
| adjustment which reconfigures the settings to the display defaults. | |
| 2. | While the LCD OSD is in use, pressing the EXIT button will exit the current menu and return to the |
| previous menu. To leave an adjustment menu, press the EXIT button when the adjustment is complete. | |
| 3. | From the Main Menu screen, pressing the EXIT button, will exit the LCD OSD. |
10 | Rack LCD Console User Manual |
