Schneider Electric V334 manual

70012-1296-00
ADDENDUM 08/2008
ION, ION Enterprise, MeterM@il,
Modbus, Power Measurement,
PowerLogic,Schneider Electric,
Square D and WebMeter are
either trademarks or registered
trademarks of Schneider Electric
in France, the USA and other
countries. All other trademarks
are property of their respective
owners.
Electrical equipment should be
installed, operated, serviced, and
maintained only by qualified
personnel. No responsibility is
assumed by Schneider Electric for
any consequences arising out of
the use of this material.
© 2008 Schneider Electric.
All rights reserved.
www.global.powerlogic.com
What’s New in v334
Firmwareversion334(v334)fortheION8800meteroffersModbusMasterover
TCP/IP.ThisallowstheION8800toreadorrecorddatafromModbusslavedevices
usinguptotenavailableTCPsockets.TheModbusMasteroverTCP/IPutilizes
onespecific,dedicatedcommunicationsconnectionthatisindependentofthe
existingavailablemaximum4simultaneousEthernetconnections.
NOTE
To support the new features in v334, download the latest version of ION Setup from
www.global.powerlogic.com.
ModbusMasteroverTCP/IPmustbeconfiguredthroughIONSetuporION
Enterprisesoftware.SeetheION8800UserGuideforinstructions.
Asamaster,theION8800canaggregatedatafrommultipleslavedevicesandthen
passittoIONsoftwareforanalysis.ModbusMasteralsogivesyoucontrolof
devicesonaModbusnetworkwiththemeter’swritecapability.
TherearetwocommunicationlinkstoconsiderwhenyouModbusMasterwiththe
ION8800:thelinkbetweentheIONsoftwareandtheION8800,andthelink
betweentheION8800andtheModbusnetwork.
4 simultaneous connections.
Protocols include ION, DNP,
Modbus, etc.
SMTP Server (email)
outgoing only
NEW
TCP/IP Modbus Mastering dedicated
TCP port. Connect with up to 10
Modbus slave IP addresses
Ethernet Connections for the ION8800