14.using the engine start feature
Your battery charger can be used to
14.1Set the
14.2Once the charger is connected, set the
14.3Plug the power cord into a grounded AC wall outlet.
14.4Crank the engine for no more than five seconds. If the engine does not start, wait four minutes before cranking again.
14.5During extremely cold weather, or if the battery is severely exhausted, charge the battery for about five minutes before cranking the engine.
14.6If the engine still does not start, charge the battery for five more minutes in the 40 amp position before cranking it again for five seconds.
14.7After the engine starts, unplug the charger power cord from the outlet.
Then move the
IMPORTANT: Do not try to start the engine without a battery in it. You could cause damage to the electrical system.
If the engine does turn over, but never starts up, there is not a problem with the starting system, there is a problem somewhere else with the vehicle. STOP cranking the engine until the other problem has been diag- nosed and corrected.
15.maintenance instructions
15.1Before performing maintenance, unplug and disconnect battery charger
(see sections 6.7 or 7.6).
15.2After use, use a dry cloth to wipe all battery corrosion and other dirt or oil from terminals, cords, and the charger case.
15.3Through routine maintenance, ensure all user installed parts are secured.
15.4Servicing does not require opening the unit. There are no
16.storage instructions
16.1Store charger unplugged, in an upright condition. Cord will still conduct electricity until it is unplugged from outlet.
16.2Store inside, in a dry, cool place (unless you’re using an
16.3Do not store clips on handle, clipped together, on or around metal, or clipped to cables.
•15 •
