Panasonic EY6950 operating instructions Lamp Indications, Maintenance, Accessories

. LAMP INDICATIONS

Red Flashing

Red Lit

Flashing quickly

Orange Lit

Orange Flashing

Charger is plugged into a wall outlet. Ready to charge.

Now charging

Charging is completed.

Battery pack is warm. Charging will begin when temperature of battery pack drops.

Charging is not possible. Clogged with dust or malfunction of the battery pack.

. MAINTENANCE

Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, ben- zine, or other volatile solvents for cleaning.

BATTERY RECYCLING

ATTENTION:

A nickel metal hydride battery that is recyclable powers the product you have pur- chased.

Please call 1-800-8-BATTERYfor information on how to recycle this battery.

. ACCESSORIES

Use only bits suitable for size of drill’s chuck.

RECOMMENDED SPEED SELECTION

CAUTION: USE AT LOW SPEED WHEN STRONG FORCE IS NEEDED DURING OPERATION.

(Using at high speed while a strong force is applied may cause a motor breakdown.)

Use the following as a guide to select low or high speed for the job.

EY6950

		DRILLING			SCREW
					TIGHTENING
		WOOD /	METAL	METAL HOLE SAW
MATERIAL/	MORTAR /	YELLOW PINE
					Wood screws
CONDITION	BRICK	Thickness: 40 mm	Cold-rolled steel plate (SPC)
		(1-37/64") or less	Thickness: 1.6 mm (1/16”) or less
HIGH	ø 10 mm (3/8")	Not used	ø 6.5 mm (1/4")	Not used	ø 4 mm (5/32")
	or less		or less		or less
	ø 13 mm (1/2")	ø 36 mm (1-27/64")	ø 13 mm (1/2")	ø 34 mm (1-11/ 32")	ø 6.8 mm (17/64")
LOW	or less
		or less	or less	or less	or less
	(Slow operation)

- 10 -