Schumacher 94191065 6.2 12V DC Electrical Device Example Run-Time Chart, Appliance Type

6.212V DC Electrical Device Example Run-Time Chart

Appliance Type	Estimated Power	Estimated
		Time*
Fluorescent Lights, Cellular Phones	4 Watts	50 Hours
Radios, Depth Finders, Fans	9 Watts	25 Hours
Camcorders, DVD Players, Spotlights	15 Watts	13 Hours
Electrical Tools, Bilge Pumps	24 Watts	7.3 Hours
Electric Coolers	48 Watts	4.5 Hours
Air Compressors, Car Vacuums	80 Watts	2 Hour

*NOTE: Estimated run-times. Actual time may vary. Times are based on the internal battery being new, fully charged and operating at room tem- perature.

7.	specifications
Internal Battery Type		DieHard Maintenance-Free AGM Lead
		Acid
Nominal Voltage		12V DC
Capacity		22Ah
DC Power Outlet (Max. Continuous		15A
Load)
Jumper Cables		4-Gauge 50 Inches Long
Battery Clamps		Replaceable Jaw
Dimensions (H x W x D)		16” x 14” x 5”
Weight		22 lbs.

8.to order and replace jaws

Part Number: 2299001580

Description: Kit, Battery Clamp Rebuild

QTY Per Clamp: 1

8.1Battery Clamp Jaw Replacement

•Secure the clamp in an open position using a vise or equivalent clamping device. IMPORTANT: Make sure the rotary switch on the front panel is in the O (OFF) position and the jump starter is not plugged into a 120V AC electrical wall outlet.

•Unscrew the fastener securing the cables to the rear of the top jaw.

•Unscrew the fasteners (2) securing the Copper Jaws to the plastic clamp. Remove the jaws and braided cable.

•Reverse for assembly.

• 5 •