TROUBLESHOOTING

 

Problem

 

Solution

1.

No meter reading

A.

Check to see if the charger is plugged into the AC outlet.

 

 

B.

Make sure that the AC outlet is live, by plugging in a lamp.

 

 

C.

Check connections to the battery.

2.

LEDs are not glowing

A.

Check to see if the charger is plugged into the AC outlet.

 

 

B.

Make sure that the AC outlet is live by plugging in a lamp.

3.

Vehicle will not start in Engine Start

A.

Unplug the charger and check the connections at the battery.

 

 

B.

Wait the 4 minutes of rest time and try again.

 

 

C.

The thermal protector may have tripped and needs a little longer to close.

 

 

 

Wait and try again.

 

 

D.

On a severely discharged battery, charge for 10 to 15 minutes in the 12

 

 

 

amp manual rate to help assist in cranking.

4.Charger is connected correctly but charging is not taking place

A.The charger defaults to the 2 amp automatic condition when first charging. If your battery does not have 1 volt, you need to switch to the Manual mode for a few minutes until the charging begins and then switch back to Auto- matic mode in the desire charge rate.

6

1373-401

Page 6
Image 6
Schumacher 9275A-PE owner manual Troubleshooting, Problem Solution