5.Display shows HiP. Device demands more than 750 Watts continuous power.

Cycle inverter power OFF and ON.

If problem persists, use a larger inverter or a smaller device.

6.Display shows HoT. Inverter is too hot. Increase ventilation to inverter.

Move inverter to a cooler area.

Reduce the power consumption of the device. Inverter will automatically reset after cooling.

PROBLEM: Inverter Does Not Turn On

Reason/Solution

1.Poor contact at terminals. Unplug and reinsert PID-750.

2.Fuse is blown.

A blown fuse is usually caused by reverse polar- ity or a short circuit within the inverter. To replace, contact a qualified service technician who will diagnose the inverter and replace the fuse with the appropriate replacement.

3.Inverter may be defective.

See warranty and call Customer Service

800-621-5485 (Hours: 7 a.m. – 4:30 p.m. CST).

9

Page 10
Image 10
Schumacher PID-750 owner manual Problem Inverter Does Not Turn On