Only connect the power inverter to a 12-Volt battery. Make sure the AC plug connection is tight.

Do not modify the AC receptacle in any way.

Use only 45-amp fuses.

This device does not include an internal Ground Fault Circuit Interrupter (GFCI). For GFCI protection, use a Coleman Cable 02822 GFCI outlet.

WARNING: Handling the cord on this product or cords as- sociated with accessories sold with this product, may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

Before Using PID-750 power Inverter

It is important to know the continuous wattage of the device you plan to use with the inverter. The PID-750 must be used with devices drawing 750 watts or less. If the wattage is not marked on the device, an estimate can be made by multiplying the AC input current (Amps) by the AC voltage (110V).

Devices like TVs, fans or electric motors require additional power to start (commonly known as the “starting or peak power”). The PID-750 can supply a momentary surge in wattage; however even devices rated less than the maximum 750 watts can exceed the inverters surge capa- bility and cause an automatic overload shutdown.

3

Page 4
Image 4
Schumacher owner manual Wash hands after handling, Before Using PID-750 power Inverter