Schumacher X141B owner manual Before Using Your Power Converter

1.3Make sure the converter is not close to any potential source of flammable fumes or clothing.

1.4Do not place the converter in areas such as battery compartments or engine compartments where fumes may accumulate.

1.5Keep the converter dry.

1.6DO NOT allow the converter to come into contact with rain or moisture.

1.7DO NOT operate the converter if you, the converter, the device being operated or any other surfaces that may come into contact with any power source are wet. Water and many other liquids can conduct electricity, which may lead to serious injury or death.

1.8Do not place the converter on or near heating vents, radiators or other sources of heat or flammable materials.

1.9Do not place the converter in direct sunlight. The ideal air temperature for operation is between 50° and 80°F.

1.10Only connect the power converter to a 12V accessory outlet. Do not attempt to connect the converter to any other power source, including an AC power source. Connecting to a 6V or 16V battery will cause damage to the converter.

1.11Make sure the AC plug connection is tight.

1.12Do not modify the converter in any way including cables, plugs or switches as it may result in property damage or personal injury.

1.13 Incorrect operation of your converter may result in damage and personal injury. The converter output is 120V AC and can shock or electrocute the same as any ordinary household AC wall outlet.

1.14Do not open – no user serviceable parts inside.

1.15This device does not include an internal Ground Fault Circuit Interrupter (GFCI).

2.BEFORE USING YOUR POWER CONVERTER

NOTE: This converter is designed to be used with a single battery, up to group 31 (130 Ah or smaller). The recommended source of power is a 12 volt deep-cycle battery, due to their high reserve capacity. Automotive batteries are recommended for only a short period of time of an hour or less.

• 3 •