MAINTENANCE
MAINTENANCE OF YOUR SCHWINN®
EXERCISE BIKE
Fig. A
Moving your Exercise Bike
To move the recumbent bike, carefully but securely lift the rear end of the bike and slowly steer the bike to the desired location (Fig A).
To move the upright bike, carefully but securely pull the handlebars toward you while gently pushing the front of the bike downward and slowly steer the bike to the desired location (Fig B). Be gentle while mov- ing the unit as any sharp impact directly or indirect- ly to the computer can affect computer operation.
Leveling your Exercise Bike
Levelers are located on each side of the rear stabiliz-
er. Rotate the knob on the top of each stabilizer endFig. B cap in the direction of the "+" to raise the leveler foot
and rotate the knob in the direction of the
Maintenance
Disconnect power supply before maintaining or servicing the bike. Use a damp cloth to wipe your bike and computer free of sweat. Inspect the bike before each use. Replace all parts at the first sign of wear or damage. Call your authorized Schwinn® Fitness products distributor if you have any questions on the proper use or maintenance of this equipment
or contact Nautilus Customer Service at
The safety level provided by the design of this equipment can only be maintained when the equipment is regularly examined for damage and wear. Inoperable components should be replaced immediately or the equipment be put out of use until it is repaired. Only
Daily: Before each use inspect for loose, broken, damaged or worn parts. Do not use if found in this condition; repair or replace.
Weekly: Check for smooth seat slider, handlebar slider, and console tilt operation. Wipe any dust, dirt, or grime from the surfaces. If needed, sparingly apply a thin coat- ing of silicone lube to ease operation.
Monthly: Check pedals and crank arms and tighten as necessary. Check all bolts and screws and tighten as necessary.
IMPORTANT: To avoid damaging the finish on your bike and computer, never use a
24
