717865 Rev B IPG User’s Guide 47
Using Settings, Continued
Set: Output Channel
Use this feature to set the output
channel to 3 or 4. Ask your cable
service provider which channel to
use.
If you have connected a VIDEO or S-
Video connector instead of the RF
cable to your TV, this setting has no
effect.
Set: VCR Commander
Use the VCR Commander setup options to set up the optional VCR Commander
recording feature.
The settings are as follows:
·The Enable setting enables the
VCR Commander feature to be
used with your Explorer DHCT.
Note: You still must set up your
VCR Commander feature after
you enable its use with this
setting.
·The Disable setting disables the
VCR Commander from being
used with your Explorer DHCT.
·The Setup setting allows you to
select the VCR input and VCR
codes that are used with the VCR
Commander feature.
Note: Refer to the VCR Commander User’s Guide for detailed instructions on setting up
the VCR Commander feature.