Scientific Atlanta DPX110 Installing the USB Drivers for Windows 98/98SE/ME/2000, Yes, Next, Next, Next, Next, Power, Status, Finish, CD ROM drives, The updated driver (Recommended)

Installing the USB Drivers

Installing the USB Drivers for Windows 98/98SE/ME/2000

If your PC has a USB interface, follow these steps to install the provided USB drivers. If your PC does not have a USB interface, you may skip this procedure.

1.Insert the USB Cable Modem Driver Installation disk into the floppy disk A drive of your PC.

2.Wait until the Power and Status indicators on the cable modem illuminate solid green; then, plug the USB cable into the USB port on your PC. The Add New Hardware Wizard window appears.

3.Click Next.

4.In the Add New Hardware Wizard window, select Search for the best driver for your device (Recommended); then, click Next.

5.In the Add New Hardware Wizard window, select CD ROM drives; then, click Next.

6.In the Add New Hardware Wizard window, select The updated driver (Recommended); then, click Next.

7.In the Add New Hardware Wizard window, click Next. The Copying Files...window appears. You will wait about 10 to 20 seconds, and then the Add New Hardware Wizard window reappears. Installation is complete.

8.Click Finish. The System Settings Change window appears.9.Click Yes to restart your computer.

ENGLISH

51