Telephone Service: Mount the Battery Pack on a Wall, Continued

Before You Begin

Before you begin, choose an appropriate mounting place. The wall can be made of cement, wood, or drywall. The mounting location should be free of obstructions on all sides, and the cables should be able to easily reach the cable modem without strain. Leave sufficient clearance between the bottom of the cable modem, and any flooring or shelving underneath, to allow access to cabling. In addition, leave enough slack in all cables so that the cable modem can be removed for any required maintenance without disconnecting the cables. Also, verify that you have the following items:

•Two wall anchors for #8 x 1 inch screws

•Two #8 x 1 inch pan head sheet metal screws

•Drill with a 3/16-in. wood or masonry bit

Using the Wall-Mounting Template

The following page shows the wall-mounting template. Copy this page and use that copy of the wall-mounting template to mark the mounting screw locations.

Important: Use the mounting slots labeled “A” on the template for vertical mounting, or use the mounting slots labeled “B” on the template for horizontal mounting.

Continued on next page

4004041 Rev B

WebSTAR DPX2203 or EPX2203 VoIP Cable Modem User’s Guide

41