SERVICE ELECTRICAL
Replacing Fuse
1.Lift hood.
2.Pull defective fuse (A) out of socket.
3.Check metal clip in fuse window and discard fuse if clip is broken.
4.Push new fuse into socket.
5.Lower hood.
Replacing Headlight Bulb
1.Lift hood.
2.Push in and turn bulb socket (A) 1/4 turn counterclockwise to remove.
3.Replace defective bulb(s) with a new bulb.
4.Insert bulb socket into housing, push in and turn 1/4 turn clockwise to install.
5.Lower hood.
Replacing Battery Discharge and Oil Pressure Indicator Light Bulbs
NOTE: If more than one bulb is defective, replace only one bulb at a time. Make sure light socket is installed in correct holder.
1. Lift hood.
Picture Note: Model S2554 used for photo purposes.
2.Turn indicator bulb socket(s) (A) 1/8 turn counterclockwise to remove it.
3.Pull bulb(s) from socket(s).
4.Push new bulb(s) into socket(s) and install socket(s) into holder.
5.Lower hood.
A
M88565
A
M88559
A
M88597
Service Electrical - Page 53
