Scotts S2048, S2554 manual Install Steering Wheel, Connect Battery

Models: S2048, S2554

1 95
Download 95 pages 59.19 Kb
Page 8
Image 8

ASSEMBLY

Connect Battery

NOTE: Do not remove the BLACK negative (–) protective cap at this time.

1.Remove and discard the RED positive (+) protective cap from the positive (+) battery terminal.

cCAUTION: DO NOT attempt to open, add fluid or service battery. Any attempt to do so will void warranty and lead to possible injury.

2.Connect blue harness wire (A) and RED positive (+) cable (B) to battery. Apply petroleum jelly or silicone spray to terminal to prevent corrosion. Make sure connection is tight. Install the red terminal cover.

3.Remove and discard the BLACK (–) protective cap from the negative battery terminal.

4.Connect black negative (–) cable (C) to battery. Apply petroleum jelly or silicone spray to terminal to prevent corrosion. Make sure connection is tight.

B

A

C

M97159

Install Steering Wheel

1.Put front wheels in the straight forward position.

2.Lubricate the steering shaft.

3.Install steering wheel with logo in the upright position.

4.Install shoulder bolt (A). Drive bolt in until head of bolt contacts steering wheel.

5.Install washer and nut (B).

6.Tighten lock nut until it is snug. Do not tighten lock nut to pull washer or head of bolt into steering wheel.

B

A

M88566

Assembly - Page 2

Page 8
Image 8
Scotts S2048, S2554 manual Install Steering Wheel, Connect Battery