Service Miscellaneous - Page 60
SERVICE MISCELLANEOUS
Avoid Damage:
• “Dry wiping” or wiping the plastic surface when it is
dry is a major source of minor surface scratches.
• DO NOT wipe hood or other plastic parts unless
wetted first.
• DO NOT apply wax unless plastic surface has been
thoroughly cleaned first.
• DO NOT use abrasive materials, such as polishing
compounds, to clean or to wax plastic surface.
• DO NOT wax plastic surfaces without drying first.
Hard-to-remove water spots will be left.
• DO NOT use solvents or commercial cleaners.
• DO NOT use power buffers to remove wax.
• DO NOT spray insect repellent near machine. Insect
repellent spray may damage plastic or painted surfaces.
• Be careful not to spill fuel on any plastic or painted
surfaces. Wipe up fuel immediately.
Repair:• Your Authorized Service Center has the professional
materials needed to properly remove surface scratches
from any plastic surfaces.
• DO NOT attempt to paint over marks or scratches in
plastic parts.
• DO NOT use polishing compounds to attempt to
remove scratches.