Battery Installation

NOTE: THIS UNIT DOES NOT CHARGE ANY DEVICE

Bottom Panel

Audio patch cord

Using the iDM3

Thank you for purchasing the iDM3. Designed to work with your iPad, iPhone, iPod (with or without cases), or other audio device, this system provides high quality audio with EXB circuitry for expanded bass. Please read the instructions carefully before operating the unit and keep for future reference.

Installing/Replacing Batteries

1.Push in and slide up to open the battery compartment door located on the front of the unit.

2.Insert 4 “AA” (LR6) batteries (not included), checking that the + and – ends of the batteries match the drawing inside the battery compartment. We recommend the use of alkaline batteries for longer life.

3.Replace and close the battery compartment cover.

For Best Performance

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.

Make sure you dispose of batteries properly (see your local regulations).

Listening to an iPad/iPhone/iPod/MP3 player or other audio device

1.Plug the attached audio patchcord located on the bottom of the unit into the headphone or Line-out Jack on your iPad, iPhone, iPod or other audio device.

2.Turn on your iPad, iPhone,iPod/MP3 player or other audio device, activate music play and set desired volume.

3.Press the Power Button located on the right side of the unit. The icon on the button will light up, indicating the unit is on.

Adjust volume on music player as needed.

4.Remember to turn unit and audio device OFF when not in use to save batteries.

NOTE: Connected iPhones can create audio interference noise when a call is received or when periodically communicating with cell phone towers. Turn on Airplane mode to disable phone while playing music.

Maintenance

Place the unit away from sources of direct sunlight or excessive heat.

Protect your furniture when placing your unit on a natural wood and lacquered finish.

Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can mar the surface.

Power On/Off Button

NOTE: ADJUST iPad/iPhone/iPod

VOLUME TO AVOID DISTORTION

Printed in China iDM3-033111-English

For models that require more than one battery

Do not mix with used or other battery types/brands

Replace all batteries at the same time

Do not open batteries

Do not dispose of in fire

Do not heat above 75ºC (167ºF)

Do not expose contents to water

Do not charge or recharge

Do not install backwards

Page 2
Image 2
SDI Technologies iDM3 manual Battery Installation, Installing/Replacing Batteries, For Best Performance