Operation
Desiccant Pack (Sillica Gel)
A substantial difference between the external (water) and the internal (camera and air) temperatures sometimes result in dewfall on the inside surface of the housing lens. This phenomenon typically happens when the camera becomes hot due to long and consecutive use.
To mitigate the effect of the dew, use the desiccant pack (included in the product package) as follows;
Using the desiccant pack (Sillica Gel)
1
2
Install the 1200HD camera to the housing
Place a desiccant pack (Sillica Gel) at the location as shown, then close the rear cover
●Make sure that the edge of the desiccant pack is not covering the
●Make sure thet the desiccant pack is not trapped when closing the rear cover.
