3.2Breather filter hole precautions

This section contains information regarding the precautions which should be taken regarding the breather filter hole in Seagate hard disc drives. Proper precautions should be taken to ensure full functionality and prevent possible damage to the drive.

Breather hole

Do not cover or seal this hole.

Figure 3 Breather filter hole location

Caution: Do not cover, seal, or insert any object into this hole.

This hole has two purposes:

To allow condensation inside the hard disc to escape

To allow air pressure inside the hard disc to equalize with ambient pressure

Note. If this hole is covered, sealed, or penetrated by any object, the drive reliability may be compromised and could lead to permanent damage. Covering or sealing this hole voids the warranty.

22

Barracuda 7200.8 PATA Product Manual, Rev. F

Page 28
Image 28
Seagate 7200.8 PATA, ST3250623A, ST3300631A, ST3400632A manual Breather filter hole precautions, Breather filter hole location