Barracuda 9 Installation Guide, Rev. B

31

tem einbauen. Die daraus u.U. resultierende verstärkte elektromagnetische Strahlung fällt in den Zuständigkeits- bereich des Systemdesigners.

5.Replace the host system’s cover.

5.Setzen Sie das Gehäuseoberteil des Host-Systems wieder auf.

Formatting the drive

Warning. Formatting a drive erases all user data. Be sure that you understand this principle before formatting any hard disc drive. It is not necessary to format a drive that previously has been used to store data, unless your intention is to erase all user data.

1.Turn on DC power.

2.Boot the system from a system floppy disc or from a previ- ously installed hard disc drive if there is one.

3.Format the disc drive. Barracuda 9 disc drives are designed to operate with a variety of operating systems. Please refer to your system or SCSI controller manual for information about formatting and setting up the drive. Some quick desk- top system notes are provided below.

Quick reference desktop system notes

Note. Refer to your system or utility manual for detailed instruc- tions)

DOS. Set the drive type in CMOS to “ Zero,” “None,” or “No hard drive installed.” Use FDISK.exe and FORMAT.exe.

Macintosh. Use a third-party drive utility (Apple’s HD Setup utility only works with Apple firmware drives).

Page 33
Image 33
Seagate ST19171WD, ST19171DC, ST19171N, ST19171WC manual Formatting the drive, Quick reference desktop system notes