Pioneer Comprehensive Guide to Setting Up Your VSX-1015TX Stereo System

The System Setup menu

2 Select the setting you want to check.

3g. EQ Data Check

Type[ ALL CH ADJUST ]

Ch [ Left EQ]

40Hz : 0.0dB 125Hz : 0.0dB 250Hz : 0.0dB 4kHz : 0.0dB 13kHz : 0.0dB TRIM : 0.0dB

•It is useful to do this while a source is playing so you can compare the different settings.

3Select the channels you want, pressing ENTER when you’re finished checking each one.

3g. EQ Data Check					3g. EQ Data Check
Type	[ ALL CH		ADJUST ]		Type	[ ALL CH	ADJUST ]
Ch	[	Left	EQ	]	Ch	[ Left	EQ]
		40Hz :	0.0dB			40Hz :		0.0dB
							0.0dB
	125Hz :		0.0dB			125Hz :	0.0dB
	250Hz :		0.0dB			250Hz :	0.0dB
		4kHz :	0.0dB			4kHz :	0.0dB
	13kHz :		0.0dB			13kHz :	0.0dB
		TRIM :	0.0dB			TRIM :	0.0dB

4 When you're finished, press RETURN.

You will return to the Manual MCACC setup menu.

06

Manual speaker setup

This receiver allows you to make detailed settings to optimize the surround sound performance. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers.).

These settings are designed to fine-tune your system, but if you’re satisfied with the settings made in Automatically setting up for surround sound (MCACC) on page 11, it isn’t necessary to make all of these settings.

Caution

• The test tones used in the System Setup are output at high volume (the volume increases to 0db automatically).

1 Select ‘Manual SP Setup’ then press ENTER.

System Setup

[ 1 . Surr			Back System	]
[ 2 . AUTO			MCACC	]
[ 3		. MANUAL MCACC		]
[	4	. Manual SP Setup		]
[	5	. Input	Assign	]
[ 6		. Other	Setup	]

Enter : Select

Return : Exit

2 Select the setting you want to adjust.

If you are doing this for the first time, you may want to adjust these settings in order:

4.	Manual SP Setup
[		]
	a. Speaker Setting
[	b. Crossover Network	]
[	c . Channel Level	]
[	d. Speaker Distance	]
[	e . THX Audio Setting	]

•Speaker Setting – Specify the size and number of speakers you’ve connected (page 46).

•Crossover Network– Specify which frequencies will be sent to the subwoofer (see Crossover Network below).

•Channel Level – Adjust the overall balance of your speaker system (page 47).

•Speaker Distance – Specify the distance of your speakers from the listening position (page 48).

•THX Audio Setting – Specify whether you are using a THX speaker setup (page 48).

3Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

45

En