Pioneer VSX-1015TX operating instructions 02 5 minute guide

025 minute guide

Note

•The speaker terminals also accept single banana plugs.

Where you place the speakers will have a big effect on the sound. Place your speakers as shown below for the best surround sound effect. See Hints on speaker placement on page 21 for more on this.

Center	Front
	speaker
speaker
	(R)
(C)

Front
speaker	Subwoofer (SW)
(L)		Surround
		speaker (RS)

	Surround
Listening	back
	speaker (SBR)
position
	Surround
	speaker (LS)
	Surround back
	speaker (SBL)

4Plug in the receiver and switch it on, followed by your DVD player, your subwoofer and the TV. Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with the TV if you don’t know how to do this.

5Use the on-screen automatic MCACC setup to set up your system.

See Automatically setting up for surround sound (MCACC) on the next page for more on this.

6Play a DVD, and adjust the volume to your liking. Make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input is selected. If it isn’t, press DVD/LD on the remote control to set the receiver to the DVD input.

In addition to the basic playback explained in Playing a source on page 13, there are several other sound options you can select. See Listening to your system on page 31 for more on this. See also Making receiver settings from the System Setup menu on page 40 for more setup options.

•If you’re not familiar with the proper DVD settings, refer to Checking the settings on your DVD (or other) player on page 13.

10

En