Seagate ST31000340SV, ST3250310SV Seek time, Start/stop times, Typical seek times msec Read Write

2.6Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:

•Track-to-track seek time is an average of all possible single-track seeks in both directions.

•Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.

*Typical seek times (msec)		Read	Write
Track-to-track	(1000, 750 & 500 GB models)	< 0.5	< 1.5
Track-to-track	(250 GB model)	< 1.0	< 1.2
Average	(1000, 750 & 500 GB models)	< 16.0	< 16.5
Average	(250 GB model)	< 15.0	< 16.0

*Measured in CE Seek mode.

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.

2.7	Start/stop times
		1 TB models	750 GB models	500 GB models	250 GB models
Power-on and Standby to Ready (sec)		17 (max)	15 (max)	13 (max)	15 (max)
Ready to spindle stop (sec)		12 (max)

Note. Start/stop measurements are taken with nominal power at 25°C ambient temperature.

10 SV35.3 Series Serial ATA Product Manual, Rev. B