Supported ATA commands | Seagate ST31000533CS guide

4.3Supported ATA commands

The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA Revision 2.6 (http:// www.sata-io.org). See “S.M.A.R.T. commands” on page 30.for details and subcommands used in the S.M.A.R.T. implementation.

Table 6: Supported ATA commands

Command name	Command code (in hex)

Check Power Mode	E5H
Device Configuration Freeze Lock	B1H / C1H
Device Configuration Identify	B1H / C2H
Device Configuration Restore	B1H / C0H
Device Configuration Set	B1H / C3H
Device Reset	08H
Download Microcode	92H
Execute Device Diagnostics	90H
Flush Cache	E7H
Flush Cache Extended	EAH
Format Track	50H
Identify Device	ECH
Idle	E3H
Idle Immediate	E1H
Initialize Device Parameters	91H
Read Buffer	E4H
Read DMA	C8H
Read DMA Extended	25H
Read DMA Without Retries	C9H
Read Log Ext	2FH
Read Multiple	C4H
Read Multiple Extended	29H
Read Native Max Address	F8H
Read Native Max Address Extended	27H
Read Sectors	20H
Read Sectors Extended	24H
Read Sectors Without Retries	21H
Read Verify Sectors	40H
Read Verify Sectors Extended	42H
Read Verify Sectors Without Retries	41H
Recalibrate	10H
Security Disable Password	F6H
Security Erase Prepare	F3H

Pipeline HD Pro Serial ATA Product Manual, Rev. C

23

Image 29

Seagate ST31000533CS manual Supported ATA commands, Command name Command code in hex

Contents

ST31000533CS Pipeline HD Pro Serial ATA Revision Date Sheets affected or comments Revision history Contents Pipeline HD Pro Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 Gbyte models Will display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Recording and interface technology Seek time Physical characteristicsStart/stop times Typical seek times msec Read Write Power specifications Active mode Power-management modesIdle mode Sleep mode Environmental specifications Vibration Nonoperating shock GB modelsOperating vibration Nonoperating vibration Electromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTs Reliability Safety certificationAgency certification Electromagnetic compatibility FCC verification Korean RRLAustralian C-Tick N176 Corrosive environment Environmental protection Pipeline HD Pro Serial ATA Product Manual, Rev. C Handling and static-discharge precautions Configuring and mounting the drive Serial ATA cables and connectors Configuring the drive Drive mounting Mounting dimensions 1000 GB models Pipeline HD Pro Serial ATA Product Manual, Rev. C Hot-Plug compatibility Serial ATA Sata interface Serial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function Definition Command name Command code in hex Supported ATA commandsSupported ATA commands F4H Word Description Value Identify Device command Xx07H Bit Word Description if bit is set to Bit Word Word Set Features command values Set Features command Code in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Technical Support Seagate Technology support servicesPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page Pipeline HD Pro Serial ATA Product Manual, Rev. C Page Disc Drive, Scotts Valley, California 95066-4544, USA