Nonoperating shock GB models, Vibration | Seagate ST31000533CS

2.8.5.2Nonoperating shock

1000 GB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2 msec duration.

2.8.6Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.8.6.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

2–22 Hz	0.25	Gs (Limited displacement)

22–350 Hz	0.50 Gs

350–500 Hz	0.25	Gs

2.8.6.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

5–22 Hz	2.0	Gs (limited displacement)

22–350 Hz	5.0 Gs

350–500 Hz	2.0	Gs

Pipeline HD Pro Serial ATA Product Manual, Rev. C

11

Image 17

Seagate ST31000533CS manual Nonoperating shock GB models, Vibration, Operating vibration, Nonoperating vibration

Contents

ST31000533CS Pipeline HD Pro Serial ATA Revision Date Sheets affected or comments Revision history Contents Pipeline HD Pro Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Drive specifications summary for 1000 Gbyte models Will display the warranty information for your drive LBA mode Default logical geometryFormatted capacity Recording and interface technology Seek time Physical characteristicsStart/stop times Typical seek times msec Read Write Power specifications Active mode Power-management modesIdle mode Sleep mode Environmental specifications Vibration Nonoperating shock GB modelsOperating vibration Nonoperating vibration Electromagnetic immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PDTs Reliability Safety certificationAgency certification Electromagnetic compatibility FCC verification Korean RRLAustralian C-Tick N176 Corrosive environment Environmental protection Pipeline HD Pro Serial ATA Product Manual, Rev. C Handling and static-discharge precautions Configuring and mounting the drive Serial ATA cables and connectors Configuring the drive Drive mounting Mounting dimensions 1000 GB models Pipeline HD Pro Serial ATA Product Manual, Rev. C Hot-Plug compatibility Serial ATA Sata interface Serial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function Definition Command name Command code in hex Supported ATA commandsSupported ATA commands F4H Word Description Value Identify Device command Xx07H Bit Word Description if bit is set to Bit Word Word Set Features command values Set Features command Code in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Technical Support Seagate Technology support servicesPresales Support Data Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Page Pipeline HD Pro Serial ATA Product Manual, Rev. C Page Disc Drive, Scotts Valley, California 95066-4544, USA