Hawk 2LP (Wide) Installation Guide, Rev. A | 17 |
DC Power connection
Hawk 2LP family "W/WD" model drives receive DC power through a 4 pin connector mounted on the PCB in line with the SCSI I/O connector. See figure below.
J1 |
|
|
| |
| 4P | 3P | 2P | 1P |
68 Pin SCSI I/O | |
Connector | Connector |
Pin Power
1P +12V
2P +12V ret
3P + 5V ret
4P + 5V
Figure 1. DC power connection, 68 pin SCSI I/O connector
Hawk 2LP "WC" and "DC" model drives receive power from the host computer through the 80 pin combined SCSI I/O and power connector. No separate DC power connector is provided on the "WC" and "DC" drives (See Figure 2b).