Hawk 2LP (Wide) Installation Guide, Rev. A | 15 |
Hawk 2LP family (Wide) information
Characteristics of the various drives covered by this manual are listed in the following table.
Legend for table column meanings:
A= capacity, unformatted megabytes
B= capacity, formatted megabytes [1]
C= number of cylinders, user accessible
D= number of heads
E= + 5 V typical current [2], Amps
F= +12 V typical current [2], Amps
Model | A | B | C | D | E | F |
ST32430W | 2.59 GB | 2.14 GB | 3992 | 9 | .70 | .38 |
ST32430WD | 2.59 GB | 2.14 GB | 3992 | 9 | .90 | .40 |
ST32430WC | 2.59 GB | 2.14 GB | 3992 | 9 | .70 | .38 |
ST32430DC | 2.59 GB | 2.14 GB | 3992 | 9 | .90 | .40 |
ST31230W | 1.28 GB | 1.06 GB | 3992 | 5 | .70 | .38 |
ST31230WD | 1.28 GB | 1.06 GB | 3992 | 5 | .90 | .40 |
ST31230WC | 1.28 GB | 1.06 GB | 3992 | 5 | .70 | .38 |
ST31230DC | 1.28 GB | 1.06 GB | 3992 | 5 | .90 | .40 |
"Wide" family products have a 16 bit SCSI data bus rather than the normal 8 bit data bus. However, they can operate on an 8 bit data bus.
Notes.
[1]Standard units are factory formatted with 512 data bytes per sector with eight spare sectors per cylinder and 2 cylinders at inner tracks reserved for spares in addition to capacity listed.
[2]Measured with an average reading DC ammeter. In- stantaneous +12 V current peaks will exceed these values.