Barracuda 2LP Installation Guide, Rev. E | 33 |
N/ND drives
Setting the SCSI ID jumpers
Use the J4 connector to set the SCSI ID (see Figure 5). To change the SCSI ID, install jumpers on the appropriate pins as shown in the illustration.
J4
Pin 1 (front view of J4)
J4
Pin 2 
Pin 1 
SCSI ID = 0 (default)
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
