Barracuda 2LP Installation Guide, Rev. E

35

Terminator power

N/ND drives

There are four possible terminator power configurations for ST31250N and ST32550N drives (see Figure 7). You will not normally need to change this option and can leave the drive configured as it was shipped from the factory.

ST31250ND and ST32550ND drives should be config- ured with a jumper connecting J1 pins 1 and 3 (and no jumper on J1 pins 2 and 4) as illustrated in Figure 7.

ST31250N and ST32550N

 

 

J1 Connector

 

 

Pin 6

 

 

Pin 1

ST31250ND and

 

ST32550ND

 

 

J1 Connector

 

 

Pin 1

 

 

Pin 2

 

 

J1

Pin 1

 

 

ST31250N and ST32550N

Pin 6

Pin 2

Term. power from drive (default)

 

Term. power to SCSI bus

 

 

Term. power from SCSI bus

 

Term. power to SCSI bus

 

 

and drive

 

 

 

J1

Pin 1

ST31250ND and ST32550ND

Pin 2

 

 

Term. power to SCSI bus (default)

 

Figure 7. Setting terminator power jumpers

Page 37
Image 37
Seagate ST32550W/WD/WC/DC, ST31250W/WD/WC/DC, ST31250N/ND, ST32550N/ND manual Setting terminator power jumpers