Seagate also has internal systems in place to ensure ongoing compliance with the RoHS Directive and all laws and regulations which restrict chemical content in electronic products. These systems include standard operat- ing procedures that ensure that restricted substances are not utilized in our manufacturing operations, labora- tory analytical validation testing, and an internal auditing process to ensure that all standard operating procedures are complied with.

2.4Reference documents

SCSI Commands Reference Manual

SAS Interface Manual

Applicable ANSI SAS documents SFF-8323 SFF-8460 SFF-8470 SFF-8482 ANSI INCITS.xxx ISO/IEC 14776-xxx ISO/IEC 14776-xxx ISO/IEC 14776-xxx

Seagate part number: 100293068

Seagate part number: 100293071

3.5” Drive Form Factor with Serial Connector HSS Backplane Design Guidelines

Multi Lane Copper Connector SAS Plug Connector

Serial Attached SCSI (SAS) Standard (T10/1562-D)

SCSI Architecure Model-3 (SAM-3) Standard (T10/1561-D) SCSI Primary Commands-3 (SPC-3) Standard (T10/1416-D) SCSI Block Commands-2 (SBC-2) Standard (T10/1417-D)

ANSI Small Computer System Interface (SCSI) Documents

X3.270-1996(SCSI-3) Architecture Model

Specification for Acoustic Test Requirement and Procedures

Seagate part number: 30553-001

Package Test Specification

Seagate P/N 30190-001

(under 100 lb.)

Package Test Specification

Seagate P/N 30191-001

(over 100 lb.)

In case of conflict between this document and any referenced document, this document takes precedence.

Cheetah 15K.6 SAS Product Manual, Rev. A

5

Page 11
Image 11
Seagate ST3450856SS, ST3146356SS, ST3300656SS manual Reference documents