Drive mounting, Attaching Sata cabling | Seagate ST32000641AS

Configuring and Mounting the Drive

www.seagate.com

For installations which require cables, you can connect the drive as illustrated in Figure 5.

Figure 5 Attaching SATA cabling

Signal connector

Power connector

Signal cable

Power cable

Each cable is keyed to ensure correct orientation. Barracuda drives support latching SATA connectors.

3.4Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 6 and Figure 7 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:

•Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.

•Use only 6-32 UNC mounting screws.

•The screws should be inserted no more than 0.150 inch (3.81 mm) into the bottom or side mounting holes.

•Do not overtighten the mounting screws (maximum torque: 6 inch-lb).

24	Barracuda XT SATA Product Manual, Rev. D

Image 24

Seagate ST32000641AS, ST33000651AS manual Drive mounting, Attaching Sata cabling

Contents

BarracudaXT 100586689 Rev. D September Revision History Revision Date Description of changes Contents Barracuda XT Sata Product Manual, Rev. D Figures Barracuda XT Sata Product Manual, Rev. D Seagate Technology Support Services Barracuda XT Sata Product Manual, Rev. D Introduction About the Serial ATA interface Drive Specifications LBA mode Default logical geometryFormatted capacity Physical characteristics Power specificationsRecording and interface technology Start/stop times Read/write power and current Operating power and currentIdle mode power Standby mode Typical 5V startup and operation current profiles 3000GB Typical 12V startup and operation current profiles 3000GB Typical 5V startup and current profiles 2000GB Typical 12V startup and current profiles 2000GB Power management modes Conducted noiseVoltage tolerance Environmental specifications Ambient temperature Temperature gradientHumidity Altitude Shock VibrationAcoustics Test for Prominent Discrete Tones PDTs Electromagnetic immunityTest Description Performance level Reference Standard Warranty Agency certification Safety certificationElectromagnetic Compatibility EMC FCC verification Environmental protection China Restriction of Hazardous Substances RoHS DirectiveCorrosive environment Drive Specifications Handling and static-discharge precautions Configuring the driveSerial ATA cables and connectors Drive mounting Attaching Sata cabling Mounting dimensions 3000GB model Mounting dimensions 2000GB model 3V power Segment Pin Function DefinitionGround 2nd mate 3V power, pre-charge, 2nd mate 12V power, pre-charge, 2nd mate12V power P14 Supported ATA commands Command name Command code in hex Command name Identify Device command Word Description Value Or Write Multiple command Number of current logical headsNumber of current logical sectors per logical track 57-58 Current capacity in sectors BE01H 00DEHFffeh Bit Word Set Features command Enable read look-ahead read cache feature defaultAAH 3 S.M.A.R.T. commands Code in features register A.R.T. command Master/slave 9 mounting Barracuda XT Sata Product Manual, Rev. D Barracuda XT Sata Product Manual, Rev. D Barracuda XT Sata Product Manual, Rev. D Barracuda XT Sata Product Manual, Rev. D Page Seagate Technology LLC ASIA/PACIFIC