Drive specification | ST32000641AS |
|
|
Voltage tolerance (including noise) | 5V + 5% |
| 12V + 10% |
Operating temperature | 0° to 60°C |
(Drive Case temperature) |
|
|
|
Nonoperating temperature (Ambient) | |
|
|
Temperature gradient (max) | 20°C per hour max (operating) |
| 30°C per hour max (nonoperating) |
Relative humidity | 5% to 95% (operating) |
| 5% to 95% (nonoperating) |
|
|
Relative humidity gradient (max) | 30% per hour |
|
|
Wet bulb temperature (max) | 37.7°C max (operating) |
| 40.0°C max (nonoperating) |
Altitude, operating | |
| |
|
|
Altitude, nonoperating | |
(below mean sea level, max) | |
|
|
Operational Shock (max) | 63 Gs at 2ms |
|
|
300 Gs at 2ms | |
|
|
Vibration, operating | 5 to 350Hz: 0.50 Gs |
| 350 to 500Hz: 0.25 Gs |
|
|
Vibration, nonoperating | 5 to 350Hz: 5.0 Gs |
| 350 to 500Hz: 2.0 Gs |
Drive acoustics, sound power |
|
Idle** | 2.7 bels (typical) |
| 2.9 bels (max) |
Performance | 2.9 bels (typical) |
| 3.3 bels (max) |
Nonrecoverable read errors | 1 per 1014 bits read |
Warranty | To determine the warranty for a specific drive, use a web browser to access the following web |
| page: support.seagate.com/customer/warranty_validation.jsp |
| From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial |
| number, model number (or part number) and country of purchase. The system will display the war- |
| ranty information for your drive. |
|
|
300,000 at 25°C, 50% rel. humidity | |
|
|
Supports Hotplug operation per the | Yes |
Serial ATA Revision 2.6 specification |
|
|
|
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
4 | Barracuda XT Series SATA Product Manual, Rev. C |
