6.0Physical/electrical specifications
This section provides information relating to the physical and electrical characteristics of the drive.
6.1AC power requirements
None.
6.2DC power requirements
The voltage and current requirements for a single drive are shown below. Values indicated apply at the drive connector.
The standard drive models and the SED drive models have identical hardware, however the security and encryption portion of the drive controller ASIC is enabled and functional in the SED models. This represents a small additional drain on the 5V supply of about 30mA and a commensurate increase of about 150mW in power consumption. There is no additional drain on the 12V supply.
Cheetah 15K.7 SAS Product Manual, Rev. A | 19 |
