Medalist Pro Installation Guide, Rev. B | 27 |
Table 5a. Interconnect characteristics for LVD I/O circuits
| Maximum distance between | |||
| terminators (meters) [1] [3] [5] | |||
|
|
|
| |
Interconnect | ||||
|
|
|
|
|
25 | 25 | 25 | 25 [2] | |
(2 devices) |
|
|
|
|
|
|
|
|
|
15 | 15 | 15 | 12 | |
(up to 16 devices) [4] |
|
|
|
|
|
|
|
|
|
[1]For environments where all elements of the bus (cables, device inter- faces, environmental noise and other parameters) are controlled to be better than minimally required, it may be possible to extend the path length and device count.
[2]SCSI devices shall be within a stub length of the termination (.1 meter).
[3]Values specified by data rate shall apply even if a slower data rate is negotiated.
[4]Loads spaced at least 8 inches (20.3 cm) apart (refer to SCSI EPI T10/1143D specification).
[5]See ANSI T10/1302D specification for details.
