Seagate ST410800N/ND, ST410800W/WD manual Initial setup information

18 Elite 9 Installation Guide, Rev. B

continued from previous page

12All power-saving features are enabled.

13Seeking is defined as a third-stroke seek at OD. A com- mand is issued every 23 msec.

14Read track is defined as repeat reads of track 15 with an 88% duty cycle.

15Operating condition is a third-stroke seek at OD and read 1 track. A command is issued every 60 msec for ST410800W drives and every 72 msec for ST410800WD drives.

16Read track is defined as repeat reads of track 15 with a 45% duty cycle at 00.

Initial setup information

The following topics are presented to guide you through the installation process. These topics are presented in the order you should follow to properly install the drive.

•Setting the SCSI ID jumpers

•Terminating the drive

•Changing other applicable jumper options

•Synchronizing spindles

•Providing adequate cooling

•Mounting the drive and connecting cables

•Formatting the drive

Each option-jumper illustration identifies the original equipment manufacturer (OEM) default factory setting. These are the most commonly used settings but are not necessarily the ones set for your particular system.