ST9144 Family Installation Guide, Rev. B | 9 |
Caution. Improperly plugging the connector may damage the drive. To prevent damage, the mating cable connector should be keyed by blocking the hole for
Figure 1: ST9144 family AT drive setup
Note: The drive is shown with the PC Board up.
|
| For ST9051A and |
| Notch | ST9077A Only: |
|
| A notch here |
|
| indicates the drive |
|
| has metric screw |
|
| threads, thread |
Master/Slave | Pin 1 | size: M3x0.5 |
|
| |
Configuration Jumpers | Key - Pin 20 (Removed) |
|
| PCB | |
|
|
A | C |
B | D |
Drive is Master, no Slave drive present
Drive is Master, Seagate Slave drive present
Drive is Slave to another ST9144 Family Master
Reserved Positions (Do Not Use)
