Word | Description | Value |
|
|
|
87 | Command sets enable extension | 4000H |
88 | Ultra DMA support and current mode (see note following this | xx3FH |
| table) |
|
|
|
|
89 | Security erase time | 0000H |
|
|
|
90 | Enhanced security erase time | 0000H |
|
|
|
92 | Master password revision code | FFFEH |
|
|
|
93 | Hardware reset value | xxxxH |
| (see description following this table) |
|
|
|
|
94 | Auto acoustic management setting | xxxxH |
0000H | ||
100– | Total number of | ST980210A = 156,501,488 |
103 | (see Section 2.2 for related information) | ST980210AS = 156,501,488 |
| ST960210A = 117,410,240 | |
| These words are required for drives that support the | |
| ST960210AS = 117,410,240 | |
| addressing feature. Maximum value: 0000FFFFFFFFFFFFh. | |
| ST940210A = 78,340,160 | |
|
| |
|
| ST940210AS = 78,340,160 |
|
| ST920210AS = 41,021,800 |
|
|
|
104– | 0000H | |
127 |
|
|
|
|
|
128 | Security status | 0001H |
|
|
|
129– | xxxxH | |
159 |
|
|
|
|
|
160– | 0000H | |
254 |
|
|
|
|
|
255 | Integrity word | xxA5H |
Note. See the bit descriptions below for words 63, 88, 93 and 94 of the Identify Drive data:
Description (if bit is set to 1)
Bit | Word 63 |
0Multiword DMA mode 0 is supported.
1Multiword DMA mode 1 is supported.
2Multiword DMA mode 2 is supported.
8Multiword DMA mode 0 is currently active.
9Multiword DMA mode 1 is currently active.
10Multiword DMA mode 2 is currently active.
Bit | Word 88 |
0Ultra DMA mode 0 is supported.
1Ultra DMA mode 1 is supported.
2Ultra DMA mode 2 is supported.
3Ultra DMA mode 3 is supported.
LD25 Series 5400.2 Product Manual, Rev. C | 33 |
