Seagate ST96023AS, ST980825AS, ST94015AS manual Drive specifications, Specification summary table

2.0Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the ST910021AS, ST980825AS, ST96023AS, and ST94015AS models.

2.1Specification summary table

The specifications listed in this table are for quick reference. For details on specification measurement or defi- nition, see the appropriate section of this manual.

Table 1:	Drive specifications
Drive specification		ST910021AS	ST980825AS	ST96023AS	ST94015AS
Formatted Gbytes (512 bytes/sector)		100	80	60	40
Guaranteed sectors		195,371,568	156,301,488	117,210,240	78,140,160
Bytes per sector		512
Default sectors per track		63
Default read/write heads		16
Default cylinders		16,383
Physical read/write heads		4	4	3	2
Discs		2	2	2	1
Recording density in BPI (bits/inch max)		700,000
Track density TPI (tracks/inch max)		114,000
Areal density (Gbits/inch2 max)		81
Spindle speed (RPM)		7,200
Internal transfer rate (Mbits/sec max)		539
Sustained transfer rate OD (Mbytes/sec)		45.8
I/O data transfer rate (Mbytes/sec max)		150 (SATA 1.0)
ATA data-transfer modes supported		SATA 1.0, SATA II
		PIO modes 0–4
		Multiword DMA modes 0–2
		Ultra DMA modes 0–5
Cache buffer (Mbytes)		8
Height (max)		9.5 +/- 0.2 mm (0.374 +/- .0078 inches)
Width (max)		69.85 mm (2.75 +/- 0.0098 inches)
Length (max)		100.5 +/- 1.6 mm (3.957 +/- 0.063 inches)
Weight (typical)		115 grams (0.254 lb)
Average latency (msec)		4.2 msec
Power-on to ready (typical)		4 seconds
Standby to ready (typical)		3 seconds
Startup current (typical) +5V (peak)		1.28 amps

Momentus 7200.1 SATA Product Manual, Rev. B 3