Seagate ST96023AS, ST980825AS, ST94015AS manual Seek time, Start/stop times, Typical seek times

2.7Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:

•Track-to-track seek time is an average of all possible single-track seeks in both directions.

•Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.

Table 2:	Typical seek times
*Typical seek times (msec)		Read	Write
Track-to-track		1.5	2.0
Average		10.5	12.5
Full-stroke		22.0	24.0
Average latency		4.2

*Measured in performance mode

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.

2.8Start/stop times

Time to ready	Typical	Max
Power-on to Ready (sec)	4	8
Standby to Ready (sec)	3	8

Momentus 7200.1 SATA Product Manual, Rev. B 7