Initial Settings
Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time.
1.Slide the mode switch to [ 
] or [ 
],
and press the MENU button. |
| |
2. Select [Setup] with the button. |
| |
3. Select [Date/Time] with the / |
| |
buttons, and press the SET button. |
| |
Select the item’s field with the / |
| |
buttons and adjust the value for | SET:Adj. | |
the date and time with the / |
| |
buttons. |
| |
The time is displayed in |
| |
format. |
| |
After confirming all settings are |
| |
correct, press the SET button. |
| |
4. To exit from the [Setup] menu, press the | SET:Enter | |
MENU button. | ||
|
Getting Started >>
17
