SP6570 16 gallon detach 12/8/04 8:47 AM Page 5
Accessory Caddy/Caster Foot/Caster Assembly
1.Remove the power head and lid assembly from the dust drum and set aside.
2.Turn the dust drum upside down on the floor.
3.Insert the 2 caster feet into the bottom of the drum, as shown, on the 2 loca- tions near the drain cap. Push on the caster foot until the foot is flush with bottom of the dust drum.
Caster |
|
Caster Stem |
|
Caster Ball |
|
Caster |
|
Foot |
|
Pin |
|
| Dust |
Hole | Drum |
|
Caster
4.Insert the accessory caddy into the bottom of drum, as shown, on the opposite side of the drain cap. Push on the accessory caddy until it is flush with bottom of the dust drum.
5.Insert the caster stem into the socket of the accessory caddy and caster feet, as shown (4 places). Push on the caster until the ball on the caster stem is inserted all the way into the socket. You will hear the ball snap into the socket and the caster will swivel easily when positioning is correct.
6.Turn the drum upright.
Caster
Caster Stem
Caster
Ball
Accessory
Caddy
Dust
CasterDrum
Foot
Dust Drum
Drain Cap
5