SP6570 16 gallon detach 12/8/04 8:47 AM Page 6
Float/Cage Assembly
WARNING: For your own safety, never connect plug to power source outlet until all assembly steps are com- plete and you have read and under- stood the safety and operation instruc- tions. Do not operate vac with any parts damaged or missing.
1.Remove the detachable blower from the power head assembly by pressing down on the power head latch beneath the carry handle of the detachable blower. Set the detachable blower off to the side. Place lid upside down on the drum.
2.Locate the float and filter cage.
3.Place the float over the opening in the center of the lid with the words "This Side Towards Lid" laying face down over the hole. (See illustration.)
WARNING: To avoid personal injury or damage to vac be sure to keep hands, fingers, or any other foreign objects out of the center opening when assembling the float .
4.Line up filter cage tabs, as shown, with the slots in the center ring of the lid assembly. Push on the filter cage until the tabs snap into slots for a secure fit.
NOTE: If filter cage needs to be removed, or replaced, because the float is placed in the wrong way, use a flat blade screwdriver and insert the blade near one of the tabs between the filter cage and the center ring of the lid. Pry the tab out of the slot. Tilt the cage and lift away from the lid. To replace, follow Float/Cage Assembly instructions.
Carry Handle | Power Head | |
Assembly | ||
|
| Power Head |
| Latch |
Filter Cage |
|
Tabs (3) |
|
Float | Power |
Solid End | Assembly |
THIS SIDE |
|
TOWARD LID |
|
Filter Cage | Slots (3) |
Tabs (3) |
|
Slots (3) |
|
6
