SP6570 16 gallon detach 12/8/04 8:47 AM Page 8
Positioning Detachable Blower (Power Head Assembly)
1.Locate the detachable blower of your Craftsman Wet/Dry Vac.
2.On top of the blower (opposite the handle side of the blower); there is molded plastic lead that is used to assist assembling the unit. Position the lead into the indented area above the label.
3.Rotate the detachable blower down until the travel of the unit stops.
4.Lightly press down on the carry handle of the detachable blower until the power head latch engages the blower. The detachable blower is now latched to the lid assembly.
BLOWER
PORTABLE
Detachable
Blower
Molded
Plastic
Lead
Indented Area
Insert Hose
Insert the hose locking end of the |
| |
Lock" hose into the inlet of the vac. The | Power | |
hose should snap into place. To remove | ||
the hose from the vac, press the release | Head | |
Latch | ||
button in the hose assembly and pull the | ||
| ||
hose out of the vac inlet, as shown. |
| |
Your new Wet/Dry Vac is ready for use. |
|
| OC |
RW DR | |
PA |
|
BLOWER
PORTABLE
PRESS &
PULL
Release
Button
8