Sears 113.177035 To Store Your Accessories, Opening, Lock t Press and Release PullButton

6.Insert the soft end of the hose, which is opposite the swivel end, into the vac- uum port directly above the drain.

7.Place the utility nozzle securely on the swivel end of the hose and the vac is

ready for use.

NOTE: The swivel end of the hose is removable if more hoses need to be

attached for more length from the vac. To remove the swivel portion of the hose, grasp the hose swivel and firmly pull it out of the flexible hose. Connect the soft end of a second hose (accessory #9-17820) into the swivel end of the original hose by forcing the sections together until they fit tightly.

Blowing	/ On-Off
Port	Switch

Variable Speed

Power Cord_.Control

Area

JVacuum Port

._ Hose

End	Larger
	Opening
	Power
Caster	Assembly

Hose

Feet _,

CasterUtility

Nozzle

Open End

Of Hose

Insert the push button end of the "Pos-I- Lock" hose into the inlet of the vac. The hose should snap into place. To remove the hose from the vac, press the release button in the hose assembly and pull the hose out of the vac inlet, as shown.

Lock t

Press and Release

PullButton

To Store Your Accessories

1.Slide extension handles and accesso- ries into the slotted areas of the caster feet for storage.

2.To remove the accessories, rotate and pull upward

7