References
Trouble Checks
You may have problems that can be fixed with a few minor adjustments. Look for the type of problem you are having below and try, the suggestions to get your TV going again. For warranty information see the back cover.
Trouble
Power
TV will not turn on
No picture, no sound but "rX"has power
Picture
Blank screen or Unusable
Signal appears on screen
Picture poor, sound okay
Can't get two different
d_annels in
No picture while using
Checks and Adjustments
Plug TV in.
Plug something else into the outlet to make sure it is working. Make sure batteries in the remote are not dead.
Aim the remote at the TV and press TV.
Make sure batteries are placed in the remote the right way. See batteries on page 2.
Unplug TV for a few minutes and then turn it on again.
Check antenna connections.
Check position of Cable/Air feature. See page 27.
Try another channel. Inactive channel may be tuned.
Ivtake sure component connected to the VIDEO INPUT jacks is turned on if you choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR if watching a VCR.
Make sure TV/VCR button on VCR is in correct position.
Try another channel.
Scan the channels.
Check antenna connections.
Adjust TV picture. See pages
Make sure small picture is tuned to channel 00.
Make sure the component connected to the back of the TV is turned on. Make sure a video cable is also connected to the TV's VIDEO INPU'i" jack if using an
Make sure the AUDIO and VIDEO OUT jacks on the VCR, Laserdisc player, or Camcorder are connected to the TV's VIDEO and AUDIO IN
jacks.
.blake sure VCR 1 Channel is set to Disabled. See page 9.
Make sure a video cable is also connected to the TV's VIDEO INPUT jack.
3O
