Sears 274.4279839 owner manual Program the remote for audio equipment, Codes

Using Your TV and Remote

With Audio Equipment: Programming and Basic Operation

Refer to the Connection Book or your Audio equipment owner's manual to/took up your audio equipnlent. Your remote controls some audio equipment such as a radio, CD player, tape player, turntable, or amplifier. The

remote may need to be programmed for your equipment. Use the codes below or on the sheet packed in with your renlote.

Program the remote for audio equipment

A.Point the remote at the audio equipment and hold AUDIO.

B.Enter the code from the code list.

C.Release AUDIO.

D.Press ON/OFF to turn it on. If

nothing happens, try pressing AUDIO and then ON/OFF.

E.Repeat A-D with another code if the first one does not work.

Basic Operation

Audio	Codes
RCA/Dimensia
AM/FM	........................... 03
CD	07
Tape	06
Phono	05
Aux	04

a.Point the remote at the audio equipment and press AUDIO.

B.Press ONIOFF to turn it on.

C.Use the buttons on the remote that relate to audio functions. Not all buttons highlighted may work with your equipment.

W.Turn the audio equipment off using the audio component's power off button.

15